新闻动态 News/技术分享Technology

选型笔记:MLCC 容值随直流偏压下降,核对时看这三个参数Selection Notes: MLCC Capacitance Drops Under DC Bias — Three Parameters to Check

从介质类型、工作电压与温度三个角度,说明高容 MLCC 选型时的有效容值核对方法。Dielectric type, working voltage and temperature: how to check effective capacitance when selecting high-capacitance MLCC.

选型笔记:MLCC 容值随直流偏压下降,核对时看这三个参数 Selection Notes: MLCC Capacitance Drops Under DC Bias — Three Parameters to Check

高容值贴片电容的标称容值通常在低压小信号条件下测得。实际电路中,施加直流偏压后有效容值会下降,X5R 与 X7R 的下降幅度与介质厚度、额定电压相关。按额定电压选型而不核对工作点,容易出现滤波不足。

High-capacitance parts are usually specified at low voltage and small signal. In real circuits, DC bias reduces effective capacitance, with the drop for X5R and X7R depending on dielectric thickness and rated voltage. Selecting by rated voltage alone can leave filtering short.

核对时建议同时看三个参数:工作电压下的容值曲线、允许的温度范围,以及纹波电流引起的温升。对小型化设计,还可以把单颗大容值与多颗并联的方案放在同一板面预算下比较。

Three parameters are worth checking together: the capacitance curve at the working voltage, the allowed temperature range, and the temperature rise from ripple current. For compact designs, compare one large part against a parallel bank within the same board-area budget.

我们会在样品阶段按客户的实际工作点提供容值参考数据,并给出替代规格建议,具体数值以规格书与实测为准。

During sampling we provide capacitance references at the customer's actual operating point and suggest alternates, with figures confirmed against datasheets and measurements.

需要了解对应的规格与参数细节,可通过联系表单提交具体需求。For product and process details, submit a specific requirement through the contact form.

联系我们Contact us