软端子 MLCC 在板弯工况下的应用说明Soft-Termination MLCC in Board-Bend Conditions
从分板应力与温度循环两个角度,说明软端子结构适合的板级场景。Depanelling stress and thermal cycling: where soft-termination parts fit at board level.

贴片电容的开裂多发生在分板、装配与温度循环过程中。软端子结构在端电极中加入柔性层,可吸收部分板弯形变,降低应力集中到陶瓷体的概率。
Cracks in MLCC parts often appear during depanelling, assembly and thermal cycling. Soft terminations add a flexible layer that absorbs part of the board-bend deformation and reduces stress concentrated in the ceramic body.
软端子并非适用于所有场景:在空间紧张的小板上,普通端子规格通常已经足够,选型时应结合板厚、拼板方式与装配受力判断。
Soft terminations are not needed everywhere: on small, space-constrained boards standard parts are usually sufficient. Selection should consider board thickness, panel design and assembly forces.
批量导入前建议先做分板与温度循环验证,并把验证条件记录在项目文档中,便于后续机型复用。
Before volume adoption, run depanelling and thermal-cycling validation and record the conditions in the project file for reuse on later models.
需要了解对应的规格与参数细节,可通过联系表单提交具体需求。For product and process details, submit a specific requirement through the contact form.
联系我们Contact us